Description
B-044-24-N Solder Sleeves & Shield Tubing, Silver, — BOLTON SKU 62686.
About the B-044-24-N Solder Sleeve Shield Termination
The B-044-24-N is a SolderSleeve-type shield termination device from TE Connectivity’s Raychem range. It combines a heat-shrinkable, transparent blue PVDF (polyvinylidene fluoride) sleeve with a pre-fluxed solder preform and two pre-installed 24 AWG stranded lead wires in a single one-piece part. Distributor listings for this part number give an inside diameter of 3.4 mm. Positioned over the exposed screen of a small coaxial or screened wire and heated, the sleeve recovers while the preform melts, soldering the leads to the shield and insulating and strain-relieving the joint in one controlled operation. The transparent sleeve leaves the finished joint inspectable, and the one-piece format gives a repeatable termination without hand-soldering variability, which is why the family is standard practice in screened aerospace and defence harnesses. Published overall length figures differ between distributors, so confirm the dimension required at quotation.
Key specifications
| Manufacturer | TE Connectivity (Raychem) |
|---|---|
| Type | SolderSleeve shield termination |
| Sleeve material | PVDF, transparent blue |
| Inside diameter | 3.4 mm |
| Lead wires | Two pre-installed 24 AWG leads |
Typical applications
SolderSleeve shield terminators are used to break out cable screens to ground leads in avionics, UAV and vehicle electronics harnesses, to terminate coaxial screens at connectors, and in EMI/EMC-controlled builds where every screen termination must be uniform and inspectable.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Browse more in Emi Emc Shielding.
Reviews
There are no reviews yet.