Avionics & Electronics Heat-Shrink & Sleeving

HellermannTyton 308-10600 Heat Shrinkable Tubing, Adhesive Lined, 3:1, 6 mm, Black

MPN
308-10600
SKU
60805
Brand
HellermannTyton
Category
Heat-Shrink & Sleeving
Capability
Avionics & Electronics

HellermannTyton 308-10600 Heat Shrinkable Tubing, Adhesive Lined, 3:1, 6 mm, Black — HIS-A series adhesive-lined heat-shrink tubing, 3:1 ratio, 6 mm to 2 mm, black, 5 m reel. Price on request — submit an RFQ for pricing, lead time and documentation requirements.

What to include in your RFQ →

Description

HellermannTyton 308-10600 Heat Shrinkable Tubing, Adhesive Lined, 3:1, 6 mm, Black — BOLTON SKU 60805.

About the 308-10600 Adhesive-Lined Heat-Shrink, 3:1 6 mm

HellermannTyton 308-10600 Heat Shrinkable Tubing is part number 308-10600 in the manufacturer’s HIS-A series of adhesive-lined, medium-wall heat-shrink products, designated HIS-A-6/2. It has a 3:1 shrink ratio, recovering from a supplied inside diameter of 6 mm down to 2 mm, so a single size can seal over stepped profiles such as cable-to-connector transitions. The cross-linked polyolefin outer wall is lined with a hot-melt adhesive that flows during recovery to form a sealed, strain-relieved joint resistant to moisture ingress. The tubing is black, is rated by the manufacturer for operating temperatures from −55 °C to +125 °C, and is supplied on a 5 m reel in this pack format. Because the liner flows and cools into a semi-rigid sealant, the recovered sleeve also adds mechanical protection at the transition, and the reel format allows repeatable cut lengths in production harness work.

Key specifications

Manufacturer part HellermannTyton 308-10600 (HIS-A-6/2)
Shrink ratio 3:1
Inside diameter, supplied 6 mm
Inside diameter, recovered 2 mm
Wall construction Cross-linked polyolefin, hot-melt adhesive lining
Operating temperature −55 °C to +125 °C
Colour / format Black, 5 m reel

Typical applications

Adhesive-lined 3:1 tubing in this 6 mm size is used to seal and strain-relieve wire splices, breakouts and connector back-ends on small-gauge cabling in harness manufacture and repair. The moisture-blocking adhesive makes it suitable for junctions exposed to condensation, washdown or outdoor conditions where unlined thin-wall tubing would not provide an environmental seal.

Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).

Browse more in Heat-Shrink & Sleeving.

Reviews

There are no reviews yet.

Be the first to review “HellermannTyton 308-10600 Heat Shrinkable Tubing, Adhesive Lined, 3:1, 6 mm, Black”

Your email address will not be published. Required fields are marked *

Documentation & RFQ readiness

BOLTON sources and supplies to specification. Documentation availability depends on the product, its manufacturer/supplier source and your stated requirement, and can be confirmed during quotation. To get an accurate quote quickly, include:

  • The exact manufacturer part number (MPN) and quantity required
  • Any drawing, specification or standard that applies, where relevant
  • Required documentation — e.g. certificate of conformity, datasheet, test report, SDS/TDS, calibration certificate or traceability, where applicable
  • Delivery location and required-by date

Explore related categories