Description
Weller LT 1LX Soldering Tip 0.2mm (T0054442499) — BOLTON SKU 67916.
About the T0054442499 Weller LT 1LX Tip, 0.2 mm
The T0054442499 LT 1LX soldering tip is Weller item T0054442499. Its defining feature is geometry rather than size: it is a long conical tip with a 0.2 mm diameter point that is bent through 35 degrees, with an overall tip length of one inch. The bend lets the operator approach a joint from a shallow angle while keeping the handpiece clear of neighbouring components and fixtures, which is the reason a bent tip is specified over the straight equivalent. It belongs to the LT series, built from solid copper with an iron plating and fitted to the WP 80, WSP 80 and WXP 80 irons, and Weller positions the series for both surface mount and through-hole work. Country of origin declared on supply is China.
Key specifications
| Manufacturer part number | T0054442499 |
|---|---|
| Brand | Weller |
| Tip shape | Long conical, bent 35 degrees |
| Tip diameter | 0.2 mm |
| Tip length | 1 inch |
| Tip series | LT |
| Compatible irons | WP 80, WSP 80, WXP 80 |
| Country of origin | China |
Typical applications
The 35 degree bend suits work where the joint is obstructed or recessed: soldering close to tall components, working inside a partially assembled chassis, or reaching pads under a fitted harness. At 0.2 mm the point is intended for fine-pitch devices and small pads, so this tip is usually held for rework and inspection-driven repairs rather than production tinning.
Supplied by BOLTON Technical Equipment Supplies against request for quotation. Add this item to your RFQ basket to request pricing, lead time and documentation requirements (e.g. CoC, datasheets or test reports where applicable).
Reviews
There are no reviews yet.